All-in-1 Premium Pressure Washing Concentrate
Zep Commercial All-in-1 Pressure Washing Concentrate works with pressure washing machines to remove dirt, grease, oil and stains caused by algae, mod, mildew and more. The concentrated liquid makes up to 26 gallons of cleaner.
House & Siding Pressure Wash Concentrate
Pressure washing concentrate formulated to clean algae, mold and mildew from home siding & roof.
Wood Deck & Fence Pressure Wash Concentrate
Decks, fences and other outdoor wood surfaces can become discolored from dirt and stains. Zep Commercial Deck and Fence Cleaner Concentrate cleans outdoor wood surfaces to enhance their looks or prepare them for staining or painting.
Share this with your friends!
This product is formulated particularly for use in pressure washers.
Use the following safety equipment when using this product.
Key Ingredients: SODIUM HYDROXIDE; caustic soda; soda lye POTASSIUM HYDROXIDE; caustic potash; lye ETHYLENE GLYCOL MONOBUTYL ETHER; 2-butoxyethanol; butyl cellosolve Handling and Storage: Put on appropriate personal protective equipment. Do not get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not ingest. If during normal use the material presents a respiratory hazard, use only with adequate ventilation or wear appropriate respirator. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous. Do not reuse container.
Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Keep out of the reach of children.
Test pressure washer for surface compatibility, with and without the cleaner, in an inconspicuous area, rinse and allow to dry before proceeding. Saturate plants, shrubs and grass with water before and after cleaning. Follow the directions in your pressure washer owner's manual for safe use and best results. 1. Rinse surrounding plants with water, before and after application. 2. Wet the surface to be cleaned before applying the product. 3. Place detergent siphon tube and screen filter directly into detergent container. Open meter valve (if applicable) for maximum product flow. For reservoir machines, pour product (full strength) into pressure washer. 4. Spray at low pressure onto a wet surface. 5. Allow product to remain on the surface for 10 minutes to penetrate but do not allow product to dry on the surface. 6. Remove siphon tube from solution and thoroughly rinse surface with high pressure spray, holding nozzle 8 to 12 inches from the surface at a 45 degree angle. 7. Flush siphon tube with clean water prior to storage.
Purchase Zep Commercial products at any of the retailers below