Stain-Resistant Floor Sealer
Zep Commercial Stain Resistant Floor Sealer creates a level, stain-resistant, clear gloss surface for high-traffic vinyl, marble and other hard surface floors.
Heavy-Duty Floor Stripper Concentrate
Zep Commercial Heavy-Duty Floor Stripper goes on quickly with a cotton mop or scrubbing machine, then digs deep to remove stubborn finishes and heavy buildup. One gallon of the ammonia-free formula makes nine gallons of solution.
High-Traffic Floor Polish
Zep Commercial High-Traffic Floor Polish seals and protects vinyl and other hard surface floors. The 20 percent solid formula resists scuffs, heal marks and meets slip resistance standards. Apply with a dry mop. Easy to maintain.
Share this with your friends!
Step #3 (part two) in the Floor Care 4 Step Process. For best results, dry burnish with a beige pad three times a week. To periodically rejuvenate the gloss, use a ultra high-speed burnisher with a natural beige pad.
Use the following safety equipment when using this product.
Key Ingredients: DIPROPYLENE GLYCOL METHYL ETHER; dipropylene glycol monomethyl ether
2-(2-ETHOXYETHOXY)-ETHANOL; diethylene glycol monoethyl ether, ethoxydiglycol Handling and Storage: Put on appropriate personal protective equipment. Workers should wash hands and face before eating, drinking and smoking. Do not get in eyes or on skin or clothing. Use with adequate ventilation. Do not ingest. Do not reuse container.
Store in accordance with local regulations. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Protect from freezing. Store between the following temperatures: 40°F and 120°F (4.4°C and 49°C).
Strip floor using Zep Commercial® Heavy-Duty Floor Stripper. Apply 1–2 coats of Zep Commercial® Stain-Resistant Floor Sealer. Allow floor to dry. Apply 4 thin coats of Zep Commercial® Wet Look Floor Finish. Allow floor to dry between coats; approximately 30 minutes under normal conditions. Zep Commercial® Wet Look Floor Finish should be maintained by frequent dust mopping and daily damp mopping with Zep Commercial® Neutral Floor Cleaner. Keep floor dust free. Maintain by dry burnishing with a beige pad. Best results are obtained if burnished 2 to 3 times each week. This product is able to be stripped and reapplied as needed.
Purchase Zep Commercial products at any of the retailers below