Share this with your friends!
Step #3 in the Floor Care 4 Step Process. For best results, use a dry rayon string mop to apply four coats of finish in figure eight motions on the floor.
Use the following safety equipment when using this product.
Key Ingredients: DIPROPYLENE GLYCOL METHYL ETHER; dipropylene glycol monomethyl ether 2-(2-ETHOXYETHOXY)-ETHANOL; diethylene glycol monoethyl ether, ethoxydiglycol Handling and Storage: Put on appropriate personal protective equipment. Workers should wash hands and face before eating, drinking and smoking. Do not get in eyes or on skin or clothing. Use with adequate ventilation. Do not ingest. Do not reuse container.
Store in accordance with local regulations. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Protect from freezing. Store between the following temperatures: 40°F – 120°F (4.4°C – 49°C).
Pour polish into a clean bucket. Using a dry rayon string mop, apply 4 coats of finish. To achieve a thin, even coat, move the mop in a continuous figure-eight motion. Allow floor to dry completely between coats to prevent hazing and to ensure adhesion; approximately 30 minutes under normal conditions. Do not use fans to reduce drying time. Maintain floor by frequent dust mopping and daily damp mopping with Zep Commercial Neutral Floor Cleaner to provide a long lasting, clear gloss finish. To periodically rejuvenate the gloss, spray buff floor while using a low-speed buffing machine with a red pad, or ultra high-speed burnisher with a natural/beige pad. This product is able to be stripped and reapplied as needed.
Purchase Zep Commercial products at any of the retailers below