Share this with your friends!
Step #2 in the Floor Care 4 Step Process. For premium results, apply sealer with a dry rayon string mop. Apply two coats, allowing sealer to dry completely between coats – approximately 30 minutes.
Use the following safety equipment when using this product.
INGREDIENT Water (Solvent); Acrylic Copolymer (Film Former); Aqueous Ammoniacal Resin Solution (Dispersing Agent); Phenoxyethanol (Solvent); Fluorosurfactant (Wetting Agent); Dimethicone (Antifoaming Agent); Benzisothiazolinone (Antimicrobial Agent); Sodium Hydroxide (pH Adjuster)
To prepare floor, strip floor using Zep Commercial® Heavy-Duty Floor Stripper according to label directions. Rinse thoroughly. Allow floor to dry completely. Pour sealer into a clean bucket. Using a dry rayon string mop, apply 1 to 2 layers of sealer. To achieve a thin, even finish, move the mop in a continuous figure-8 motion. Allow floor to dry completely between applications to prevent hazing and to ensure adhesion, approximately 30 minutes under normal conditions. Do not use fans to reduce drying time; sealer needs to cure on its own. To finish floor, use Zep Commercial® High-Traffic Floor Finish, according to label directions. This step is necessary to provide a durable finish. This product is able to be stripped and reapplied as needed.
Purchase Zep Commercial products at any of the retailers below